Sage Modular Cabinets

Custom modular cabinetry · Marilao, Bulacan

Cabinets measured to your wall, not to a catalogue.

Kitchens, wardrobes, vanities, TV walls and built-ins — drawn from your actual site measurements, quoted by the linear meter, and installed by the team that built them.

Send a photo of the space and a rough wall length — we'll send back an estimate.

Timber slat divider, fold-out dining counter and kitchen in a renovated condo unit
The Sage Place · Trees Residences, Fairview, Quezon City
Projects shown19 · 2024–2026
We build inBulacan, Metro Manila, Rizal, Laguna & Tagaytay
Quoted byLinear meter
Lead timeSet with your quotation

Featured project · 2023–2025

The Sage Place

Trees Residences, Fairview, Quezon City · Full unit renovation

A whole condo unit, fitted out end to end. Every built surface in it is ours — the kitchen, the timber slat divider that splits the space, the fold-out dining counter, the bed platform with its lit headboard niche, the TV panel and the storage. It runs as a rental today, which means the cabinetry has been through two years of guests rather than one photo shoot.

  • Kitchen
  • Slat divider
  • Dining counter
  • Bed platform
  • TV panel
  • Storage & work nook

Projects

Eighteen more, room by room

Tap a project to open its full set of photos.

Grand Mesa Residences

Fairview, Quezon City

2025 · Full unit

Tagaytay Country Homes 1

Lourdes Dr, Tagaytay

2026 · Full unit

Charm Residences

Cainta, Rizal

2026 · Full unit

Grand Mesa Residences

Fairview, Quezon City

2026 · Full unit

The Courtyard by Crown Asia

Taguig City

2026 · Kitchens

Alaminos

Laguna

2026 · Wardrobes

Bathroom vanities

2026 · Baths

Grand Soho

Makati City

2026 · Full unit

Metro Gate 6

Marilao, Bulacan

2026 · Kitchens

Flora Vista Condominium

Fairview, Quezon City

2025 · Kitchens

Commercial counter fit-out

2026 · Commercial

Under-stair storage wall

2024 · Built-ins

Regalado Ave

Fairview, Quezon City

2026 · Wardrobes

Under-stair storage

2026 · Built-ins

Graphite gloss kitchen

2025 · Kitchens

Golden Hills

Tagaytay

2025 · Feature walls

Dolmar Golden Hills

Brgy. Loma de Gato, Marilao, Bulacan

2025 · Feature walls

Kitchen and bar counter

2024 · Kitchens

Materials & finishes

What your cabinet is actually made of

Two cabinets can look identical and cost twice as much apart. This is where the difference sits.

Carcass & boards

  • Marine plywood, 18mm — for wet areas and anything under a sink.
  • HMR board — moisture-resistant, our standard for kitchen bases.
  • MDF — flat and stable, best under painted and high-gloss fronts.
  • Melamine-faced board — pre-finished, quickest turnaround.

Door fronts & surfaces

  • Laminate — woodgrain, solid and textured; the workhorse finish.
  • Acrylic / high-gloss — mirror finish, seamless edge.
  • Duco paint — any colour, matte or satin, sprayed.
  • Wood veneer & slats — real grain, for feature walls and consoles.

Hardware

  • Soft-close hinges — no slamming, rated for daily use.
  • Full-extension drawer slides — the back of the drawer actually reaches you.
  • Lift-up and sliding systems — for overheads and wardrobe fronts.
  • Handles or handleless — J-profile and push-to-open available.

Edging & details

  • PVC edge banding — sealed edges so moisture can't creep in.
  • Countertops — post-formed laminate, solid surface, granite or quartz.
  • Integrated lighting — under-cabinet, wardrobe and display strips.
  • Internal fit-out — cutlery trays, pull-outs, hanging rods, dish racks.

How it works

From message to installed

Six steps, in order. You approve the drawing and the quotation before anything gets cut.

  1. Send photos & rough sizes

    Message us on Facebook with a photo of the space and an approximate wall length. You get a ballpark figure by linear meter — no visit needed yet.

  2. Site measurement

    We measure the actual wall and note plumbing, outlets and anything out of square. This is what the drawing is built from.

  3. Drawing & material selection

    You see a layout of your cabinet and pick your board, finish and hardware from physical samples.

  4. Quotation & approval

    A written quotation itemised by run and by unit. Revisions are free until you approve it. Work starts on approval and downpayment.

  5. Fabrication

    Cut, edge-banded and assembled in the shop. You get progress photos so you're not guessing.

  6. Delivery & installation

    Scheduled with you in advance, installed and levelled on site, hardware adjusted, site cleaned up.

Pricing guide

Estimated rates per linear meter

A guide, not a quotation. Your real figure comes after we measure the wall and settle the design.

Material & finishEstimated / linear meter
Laminated marine plywoodMelamine finish ₱25,000 – ₱30,000
PVC laminated boardPVC finish ₱30,000 – ₱35,000

Payment terms

60%
Downpayment on confirmation, to start the project.
40%
Final payment on completion and turnover.

Lead time

Set once the scope of work, design and requirements are final — it comes with your quotation, not before it.

  • These are estimates. Your figure may vary with the final design, dimensions, materials, hardware, accessories and site conditions.

Get an estimate

Send us the wall. We'll send back a number.

A photo and a rough measurement is enough to start. No site visit, no obligation, and nothing gets cut until you've approved the drawing and the price.

Phone0921 959 6909 Emailinfo@sagemodular.com
ShopDeca Homes Subdivision,
Marilao, Bulacan
Build & designDexter Origines